﻿1
00:00:00,680 --> 00:00:05,150
‫So now we're on the last year to fix the problems and run Carly.

2
00:00:06,230 --> 00:00:12,590
‫Now, in this lecture, I will assume that you do have trouble with network connections, and I'm going

3
00:00:12,590 --> 00:00:15,950
‫to give you some solutions so that you can fix the problem.

4
00:00:18,110 --> 00:00:24,470
‫Now, hopefully, you're not facing such a problem, so if you don't have a network situation, please,

5
00:00:24,470 --> 00:00:29,630
‫you don't have to apply any of these solutions in this lesson, but it's good to have you on the ride

6
00:00:30,170 --> 00:00:33,290
‫and you can always sharpen your troubleshooting skills.

7
00:00:34,710 --> 00:00:40,410
‫So first off, this reboot, the machine to understand whether the problem is an exception for the initial

8
00:00:40,410 --> 00:00:41,010
‫run or not.

9
00:00:42,020 --> 00:00:48,020
‫So I shut down the virtual machine because I want to look at the settings of it now, select Carly and

10
00:00:48,320 --> 00:00:51,920
‫click the Settings button and click this system tab.

11
00:00:52,490 --> 00:00:55,250
‫I want to make the RAM three gigabytes.

12
00:00:58,070 --> 00:01:01,190
‫So now I can click the Start button to boot it again.

13
00:01:07,950 --> 00:01:10,350
‫Username and password are both Kelly.

14
00:01:14,890 --> 00:01:15,490
‫OK.

15
00:01:15,520 --> 00:01:16,720
‫We are in again.

16
00:01:17,650 --> 00:01:22,390
‫So let's check the network connection by clicking the network icon at the upper right hand corner.

17
00:01:23,020 --> 00:01:26,410
‫So I think there's a problem on the DHP of the VMworld.

18
00:01:26,440 --> 00:01:29,560
‫Well, anyway, we can live without DHP as well.

19
00:01:31,000 --> 00:01:33,070
‫So I'm looking at the wired network.

20
00:01:33,610 --> 00:01:34,420
‫Don't be confused.

21
00:01:34,420 --> 00:01:40,120
‫Even though you share the wireless connection of your host machine, it's simulated as a wired network

22
00:01:40,120 --> 00:01:40,810
‫in the VM.

23
00:01:41,950 --> 00:01:48,070
‫So let's open a terminal screen and look at the networking service if it's running right service networking

24
00:01:48,460 --> 00:01:52,210
‫and press tab twice to see the available commands of the service.

25
00:01:53,230 --> 00:01:59,720
‫Networking service does not have status command, so I'll assume that it's not started and try to start

26
00:01:59,720 --> 00:01:59,770
‫it.

27
00:02:03,020 --> 00:02:07,580
‫And if you are still not connected at this point, let's go to network settings.

28
00:02:08,000 --> 00:02:12,680
‫You can go to network settings via advanced network settings under the menu.

29
00:02:17,460 --> 00:02:23,550
‫Or you can right click on the network icon in the upper right corner and select edit connections.

30
00:02:25,540 --> 00:02:34,750
‫Now, click the wheel icon under the Wire tab, OK, OK, go to the IPv4 tab to set the IP manually

31
00:02:35,110 --> 00:02:36,580
‫click the manual option.

32
00:02:37,210 --> 00:02:38,800
‫I'll choose an IP for the new column.

33
00:02:39,950 --> 00:02:46,670
‫Now, the IP block of my virtual network is 10.0 Dot to zero through 24.

34
00:02:47,390 --> 00:02:56,900
‫So I'll choose an IP from this block netmask is 255.255.255.0 for 24 IP block.

35
00:02:59,030 --> 00:03:02,160
‫The Gateway is 10.0, not 2.2.

36
00:03:03,720 --> 00:03:07,380
‫So I can use a Google DNS as my DNS server and round.

37
00:03:07,590 --> 00:03:08,850
‫Now you can click the same one.

38
00:03:10,680 --> 00:03:14,250
‫OK, I'll reboot the machine to be sure that the changes are applied.

39
00:03:26,620 --> 00:03:27,220
‫Completed.

40
00:03:28,660 --> 00:03:35,020
‫So open the terminal screen and first type pseudo asks you to switch the user to route so that you don't

41
00:03:35,020 --> 00:03:41,530
‫have to write pseudo for every command that requires privileges and then run the if config command to

42
00:03:41,530 --> 00:03:44,140
‫see the IP address of county.

43
00:03:45,120 --> 00:03:46,140
‫And it's 200.

44
00:03:47,650 --> 00:03:53,920
‫So let's ping a remote system, for example, Google DNS eight, eight eight eight eight eight.

45
00:03:55,580 --> 00:04:00,110
‫Yes, we received the response packages, and that works OK now, so to double check.

46
00:04:00,350 --> 00:04:02,780
‫Open a browser and visit any web site.

